how to draw 3d cartoon faces
Have you lot e'er wanted to create, a 3D drawing model… one that'southward based on your own original cartoon?
I mean seriously…
Would this not exist the coolest thing… ever!
Ever since I've been able to hold a pencil…
I've ever wanted to be able to have my creations – animals, characters, dragons, monsters, etc….
And brand them into sculptures.
I just think it would be then neat, to come across a 2d creature on paper – something direct out of my imagination…
Sitting there on my desk, right next to my sketch book, computer, and drawing tablet.
It would be crawly.
…
I remember non too long ago…
A friend was telling me virtually something called "iii-dimensional press".
Using sophisticated 3d modeling software like Maya and ZBrush – the very aforementioned programs that animators and concept artists use, in movies like Monsters Inc, Star Wars, Lord of the Rings, and others…
Along with some state-of-the-fine art technology – but like this 3D Systems' ZPrinter 650, seen in the photo…
A digital 3D cartoon model can be made from whatsoever drawing at all…
And then printed in real life, as a concrete statue, made of sandstone .
No doubt, it's a pretty amazing affair!
…
And lucky me…
I had the opportunity to accept part in the unabridged model-making procedure…
From selecting and submitting a cartoon of my choice – to seeing it gradually take form in 3D, on the reckoner – and to finally, have information technology printed…
Imagination, in the palm of your hands.
…
Well here on this folio of the site – I'd like to share with you, some information nearly 3D printing technology, and likewise… how I used it, to convert ane of my all-time favorite character creations…
Into a concrete 3D cartoon model.
The unabridged process, recounted in 6 steps – please click on the following links to learn more…
- Stride 1 – Submit a Drawing
- Step 2 – A Model is Created
- Footstep 3 – The Model is "Skinned" and Painted
- Stride iv – Checking to Make Certain, Everything is OK
- Stride 5 – The Model, is Printed!
- Step 6 – The Model, is Delivered to Your Doorstep
Footstep i – Submit a Drawing
The very offset footstep in the process, was deciding on a cartoon that I wanted to accept converted, into a 3D cartoon model – and and then, submit it.
I decided to go with the "Shark Dragon" – one of my favorite creations to date, and something that was also made into a cartoon lesson, here at DrawCartoonsOnline.com.
Here'south an original sketch…
Subsequently submitting the drawing, I was told it would wait really good in one case printed – because of its uniqueness, its aplenty detail, and its interesting and varied colour pattern.
Something else…
It was recommended that I submit *more than than one* image ( the aforementioned character IN THE Aforementioned POSE from different angles – front, side and back ). In doing and so, the 3D modeling artists (more on this in a fleck) – would take a improve idea of *exactly* how, the character should look.
…
For this first time, though…
I wanted to see *just how good* of job the artists could exercise, based on submitting only one image – and how they would translate the grapheme in 3D.
In this style – if everything went well – people who wanted to see their drawings printed faster – wouldn't have to get through the problem, of creating more than than one paradigm.
So yes, while providing 2 or 3 images is a good idea – delight keep reading, to run into how things turned out, with just one.
Next up, a 3D cartoon model of the Shark Dragon, is created!
Pace 2 – A 3D Cartoon Model is Created
Later on deciding upon, and submitting my drawing – next…
A team of highly skilled 3d modeling artists – using sophisticated software similar Maya and ZBrush (aye – the same programs used to create characters in movies similar Monsters INC, Star Wars, and Lord of the Rings)…
Began working away, carefully designing a three-dimensional likeness, to the Shark Dragon.
In doing so, something called a "3D wireframe" is created – thousands of interconnecting points…
Creating the illusion of shape and form, in virtual space.
…
One time this tedious task, of creating a wireframe based on your character is completed…
Next, it'due south on to the next stage of the procedure – "skinning" and painting the 3D cartoon model.
Step iii – The Model is "Skinned" and Painted
Hither in Footstep iii, the artists continued to work on the Shark Dragon, first by "skinning" the 3D wireframe… and then painting it – brining it to an even closer resemblance to the original drawing.
More snapshots of the process, here's a look at the Shark Dragon, after skinning…
Pretty awesome, isn't it!
When I showtime saw these images, I was totally taken back. I couldn't believe just how detailed the model was – and besides…
I was really impressed past how, with just one image (we were talking about this above) – they were able to really arrive there, and come up up with a 3D design – truly reminiscent of my original Shark Dragon sketch.
Amazing!
It was clear, this was a top-notch service (probably the best out there!) – as the artists went well beyond, my expectations.
…
Well adjacent up, it was time to add some color to the skinned model, preferably using a palette and pattern, close to what I had in the original colored Shark Dragon drawing.
Hither's what they came up with…
And once again… And then COOL!
I couldn't believe how far things had come, in such a brusk menstruation of time. I remember forwarding these pics to my girlfriend, my brother and my nephews.
Everyone really similar what they saw, and were just as excited equally I was – to see the final 3D model, consummate.
…
And aye, at this phase of the process – things definitely were, just well-nigh complete.
Side by side, in Step 4 – it was fourth dimension to review the images, and emailing back and forth with the artists… discussing any changes that needed to exist fabricated, in order to finalize the 3D cartoon model, for press.
Step 4 – Checking to Brand Certain, Everything is OK
Here in Step iv, I was given the opportunity to consult with the 3D modeling artists – checking to make sure, that everything was OK with the digital model images – finalized and ready for printing.
And yep, this was some other very positive role of the process.
I call back it'due south really important, that you can review and change things *earlier* it'south printed…
And that yous accept the opportunity to consult like this, back and forth via electronic mail.
Of course, in this situation (again this was my offset time always doing this)…
I was more than than happy with the results. Just check out the detail, in the photo!
…
And so, the simply email I sent back (later existence asked what changes I wanted to make), was…
"It looks amazing! Please go ahead, and print!" 🙂
The printing had begun!
Step 5 – The 3D Cartoon Model is Printed!
How exciting this was!
My own unique cosmos – the Shark Dragon!… was about to exist converted, into a real-life, physical 3D cartoon model.
Using the 3D Systems' ZPrinter 650 – the same 1 seen, in the photo about the top of this page…
The digitally rendered model, was gradually constructed – fabricated out of sandstone .
…
Interesting to know…
Sandstone is a pop medium when it comes to sculpting.
It'due south really the same substance used, to create magnificent works of art throughout history.
Take the Cambodian Temple of Angkor Wat for example…
Many of its bricks, columns, and statues (at that place'south a big one of the Buddha!) – are all made out of sandstone.
Pretty swell!
…
Well…
Once the 3D printing process was complete – again, images of the model were taken and sent to my email to prove me how it turned out.
And how did it plow out?
A.K.A.Z.I.N.G.
My Shark Dragon had come to life! 🙂
…
Well, now in that location was only one matter left…
Waiting for my newly printed 3D Shark Dragon, to go far on my doorstep.
Step 6 – The Model, is Delivered to Your Doorstep
Final step of the process – later on everything was said, fatigued, modeled, and printed – a real-life, physical 3D drawing model of my Shark Dragon – was carefully packaged and mailed out…
Directly to my doorstep!
…
Incredible.
Belongings a product of my imagination, right in my very easily like this… it was but amazing.
Better yet, was showing my friends and family unit…
Outset the original sketch (you lot can see the comparison in the image in a higher place) – and then, the finished printed model.
They just couldn't believe it. 🙂
Today, the Shark Dragon sits nicely atop my desk-bound – right side by side to my work area – a abiding reminder of the importance and ability, of creativity.
…
And there you have information technology…
Commencement-time-always feel with 3D press – a total success!
Source: https://how-to-draw-cartoons-online.com/3d-cartoon.html
Publicar un comentario for "how to draw 3d cartoon faces"